女人一区二区,红杏久久久亚洲精品,日韩国产久久婷婷,懂色中文字幕,人爱人妻,操熟女视频,欧美超碰女人天堂,秋霞福利视频四五区,久综久综久久

  • Hebei Xiangyuan Machinery manufacturing Co.,LTD!

Hot key words:Brake drum   Hub   Brake pads

news information

CONTACT:

Manager Lv:0086-13831914368
Manager Li:0086-15131910018
Post Code:055350
Tel:0086-319-6505298
Fax:0086-319-6505298
E-mail:lyxyqp@aliyun.com

ADDRESS:

Company Add:Workshop 6, Xingye Road, Economic Development Zone, Longyao County,Xingtai City,Hebei Province

News

Current Location:Index >> News >> News

What is the curing method of brake shoes

TIME:2020.01.03

The conventional maintenance method of brake shoes: Most cars adopt the front disc and rear drum brake structure, in general, the front brake shoes wear relatively fast, the rear brake shoes use a relatively long time, in the daily inspection and maintenance should pay attention to the following aspects: 1, under normal driving conditions every 5000 km to check the brake shoe, not only to check the remaining thickness, but also check the condition of shoe wear, whether the degree of wear on both sides is the same, whether the return position is comfortable, etc. . If abnormal condition is found, it must be dealt with immediately. Brake shoes are generally composed of iron lining plate and friction material two parts, must not wait for friction material parts are worn off before replacing the shoes. The front brake shoes of the Jetta, for example, are 14 mm thick, while the replacement limit is 7 mm, which includes over 3 mm of iron liner and nearly 4 mm of friction material. Some vehicles are equipped with brake shoes alarm function, once reached the wear limit, the instrument will alarm to replace the shoes. If the shoes reach the limit of use, they must be replaced. Even if they can be used for a period of time, the braking effect will be reduced and the driving safety will be affected. 3, replacement to replace the original spare parts provided by the brake pad, only in this way, in order to make the brake pad and brake disc between the good braking effect, wear and tear. 4. When replacing the shoes, the brake sub-pump must be pushed back with a special tool. Do not press back hard with other crowbars, this can easily lead to brake caliper guide screw bending, so that the brake pad stuck. 5, after changing the shoes, be sure to step on a few feet brake, in order to eliminate the shoes and brake disc gap, resulting in the first foot did not brake, accident prone. 6, brake shoes replacement, to run-in 200 km to achieve a better braking effect, just change the shoes to be cautious driving. The above is to Far Auto Parts Co. , Ltd. . Small series for you to provide the maintenance methods, I hope you are useful. Our main products are: Brake Drum, wheels, brake disc, brake shoes and other domestic, imported cars, semi-trailer, full trailer chassis accessories, a complete range, stable and reliable quality. If there is demand, welcome friends to MY COMPANY TO PURCHASE!


古蔺县| 沾化县| 灵丘县| 惠水县| 灯塔市| 喜德县| 渝中区| 阳江市| 呼玛县| 日喀则市| 靖西县| 宜章县| 桃源县| 竹北市| 外汇| 宁武县| 清河县| 大竹县| 尼玛县| 旅游| 米脂县| 大化| 绍兴县| 青神县| 曲阳县| 措美县| 综艺| 吉水县| 东安县| 麦盖提县| 汾西县| 普洱| 大渡口区| 沙河市| 无棣县| 巫山县| 岐山县| 临高县| 长沙县| 和林格尔县| 万载县|